topblog Ivoire blogs


VAS6154 Windows 10 tips and guides

VAS6154 Windows 10 tips and guides:


The VAS6154 Clone is a crappy VCX Nano which emulates a VAS5054A. So if you install ODIS you have to select VAS5054... It has nothing to do with an VAS6154.

What you can do now: 
Remove whole ODIS-S and if installed ODIS-E and everything called VAS or I+ME Actia installation, remove VCX Nano (Fake VAS6154 Drivers and Software),
over Software in System Settings, then reboot.

Remove Folders in C:Program Files(x86) and C:Program Files from ODIS-Engineering/Service, I+ME Actia, Softing, VCX Nano Software(e.g VAS?).

Then you can restart installation, don't install ODIS-Engineering it will not work with this Fake VAS6154, you can not flash with it, you will fail.

Also use Windows 7 for ODIS 4.3.3 or 5.0.6. - In Win10 you can not choose anymore VAS5054 Interface in 5.0.6 Setup, maybe also missing in 4.3.3 Setup.

Install first ODIS-Service, select Standard Notebook/PC, Interface : VAS5054, completely with Launcher. After that install the VCX Nano(Fake 6154 Software and Drivers) and after that Start ODIS-Service and install Postsetup. Then it should work.

When you don't remove the Software of the Fake 6154 Clone, you will run into the same problems as now. Once I had to install ODIS-S 2 times, because i didn't remove the software of this VAS6154 Fake.


Autel Maxisys Elite Compare with Maxisys Pro,Which is better?

Now i will be posting photos of the differences between the new Autel Maxisys Elite and the Autel Maxisys Pro (wich i use everyday on my shop)

  1. The screen is brighter because is retina display (much like an ipad).
    2. The bootup process is very very faster than the pro. The pro aprox 30 secs of boot up and 5-8 secs on the elite.
    3. It has one more usb that is very useful for connecting a mouse or a keyboard.
    4. On the outside you will see is much thinner, lighter and rubber protection (feels more like hard plastic but its rubber) on the sides not on the corners like the pro (which are real rubber).
    5. On the top right corner there is a led light that indicates the battery life which is great when you have the screen off. 6. On the pro you have to turn the screen on to see battery life.
    7. The elite come with a docking station where you can charge it of leave it out of harms way
  2. Autel-Maxisys-elite-review-6 Autel-Maxisys-elite-review-5 Autel-Maxisys-elite-review-3

Im very impressed with my purchase. I hope this helps because when i purchased my pro the lack of information made me hold of a little bit but tool a leap of faith.

My advice: If you want the most advanced diagnostic Autel scan tool on the market, then I would suggest that you go for the Elite. But if you want a high-quality, portable, and affordable diagnostic scanner between the two, then I will suggest that you pick the Pro.


Which tool to program a smart key to Hyundai i20 Elite

Purpose: For auto locksmiths and security professionals using Xhorse VVDI Mini Key Tool to program a smart key to Hyundai i20 Elite.

Here are detailed steps as below.

Step 1: Generate remote with VVDI Mini Key Tool

Put the car key into the detection coil


Select Vehicle Remote> Hyundai> Elite I20 c700 id46 433 > Generate

vvdi-mini-key-tool-program-a-key-2 vvdi-mini-key-tool-program-a-key-3 vvdi-mini-key-tool-program-a-key-4

Step 2: Program smart key with X100 pad 2

Connect X100 pad 2 with vehicle


Select: Hyundai> Security/Authorization code> 47 Authorization code (smart card)

vvdi-mini-key-tool-program-a-key-6 vvdi-mini-key-tool-program-a-key-7

Switch ignition off, Press ok- Write Security code to remember

vvdi-mini-key-tool-program-a-key-8 vvdi-mini-key-tool-program-a-key-9

Go back to Hyundai option and select: Program IMMOBILISER/ remote> smart key system> China > Type 5(without car slot)

vvdi-mini-key-tool-program-a-key-10 vvdi-mini-key-tool-program-a-key-11

Program smart keys> turn off ignition switch, Press ok> Input security code

vvdi-mini-key-tool-program-a-key-12 vvdi-mini-key-tool-program-a-key-13

Put the original key close to the start button


Program successfully. Press YES to program next key


Put smart key vertically close to the start button


Program smart key successfully


Test remote control and boot car successfully


Job’s done!