topblog Ivoire blogs

25/03/2019

FOXWELL NT650 vs NT630 ELITE

Look here: FOXWELL NT650 vs. NT630 ELITE vs. AUTEL MaxiCheck PRO 

 

  Foxwell NT650 Foxwell NT630 Elite Autel Maxicheck Pro
  FOXWELL-NT650 FOXWELL-NT630 AUTEL-MaxiCheck-PRO
Customer Rating 4.5 / 5 4.3 / 5 4.3 / 5
Price 210 usd 149 usd 199 usd
ABS/ SRS Yes Yes Yes
Turn OFF CEL Yes Yes Yes
Freeze Frame Yes Yes Yes
Oil Service Reset Yes No Yes
EPB Yes No Yes

 
Conclusion:
FOXWELL NT650 and Autel Maxicheck Pro share almost the same special functions. But the N650 is much more popular for the high quality.
NT630 Elite cannot work for EPB, BRT, EPB, DPF, SAS, TPS, TPMS, TBA, etc which NT650 can do.

So, NT650 FOXWELL wins!

23/03/2019

VCM2 clone and Ford Mustang 2006 PCM Reprogramming: Success!

Have used VCM2 SP177-C1 for reprogramming PCM on FORD MUSTANG 2006 in bank. Ready to light, just cycle keys.

vehicle specs:

vehicle: Mustang

engine type: 3v

capacity: 4.5l

transmission: automatic

fuel type: gasoline

emission level: so state emission

vcm2-FORD-MUSTANG-1

programmable module installation - pcm

vcm2-FORD-MUSTANG-2

install a new module in the vehicle

vcm2-FORD-MUSTANG-3

vcm2 sp177-c1 is working

vcm2-FORD-MUSTANG-4

erase procedure in progress

vcm2-FORD-MUSTANG-5

pcm reprogramming...pls wait

vcm2-FORD-MUSTANG-6

pcm reprogramming:

if required, obtain a pcm reprogramming label and complete with the following data

note: a reprogramming lablel is not required on vehicles serviced in the North America

date:

part:

place the completed label in the appropriate position

vcm2-FORD-MUSTANG-7

read vehicle information using Launch crp123

vcm2-FORD-MUSTANG-11 vcm2-FORD-MUSTANG-8 vcm2-FORD-MUSTANG-9 vcm2-FORD-MUSTANG-10

pcm reprogramming...

vcm2-FORD-MUSTANG-12

changing security access

vcm2-FORD-MUSTANG-13

on the table

vcm2-FORD-MUSTANG-14

Done!

Source: http://blog.cardiagtool.co.uk/

21/03/2019

How to read/write Volvo XC90 EDC17C11 via boot mode

It's aimed to help people with reading and writing bosch edc15c11 for a volvo xc90 2.4d5 2005 model?
There are different ways to do it.

MPPS - boot mode:

only boot mode
I'm did this ECU in boot with mpps

Galletto - boot mode:

I read EDC15C11 just a few days ago with galletto and used the diagram posted above here. No problem reading/writing.
FYI, you have to make checksum before writing new file, since galletto does not support chksum correction on these ECUs

Kess V2 - boot mode:

I made a few of these ECUs from Kess V2 via bootmode without any problems.

Use the help files of ksuite... its easy...

kess-v2-boot-mode-volvo

wiring diagram

kess-v2-boot-mode-volvo-wiring-diagram

connection

kess-v2-boot-mode-volvo-connection