topblog Ivoire blogs


VVDI Prog EZS/EIS Adapter Promotion

Good news: VVDI Prog EZS/EIS 37% OFF


Bad news: you have to wait for a few days (even months) after you finish payment!

Pre-order accepted only! (many people are looking for it and the Xhorse is making it)


It was 279 euro

It is 175 euro! (37% off)


  1. 1.don't need to solder
  2. data perfectly
  3. 3.Can be external power to light when working
  4. 4.easy to operate, Transparent material, better to Observe.


The adapter kit can be used

for W164(ST12),

for W169(ST12),

for W203(HC08),

for W209/211(ZWG),

for W209/211(HC12),

for W211(ST12),

for W215/220/230,

for W639(HC08),


for VITO W639(ST12).


How to:

It's easy to use MB adapter with VVDI-Prog: just put the lock (EIS/EZS) on the corresponding adapter socket and fix it; then read data directly through VVDI, without soldering


vvdi-prog-mercedes-adapter-how-to-use-1 vvdi-prog-mercedes-adapter-how-to-use-2 vvdi-prog-mercedes-adapter-how-to-use-3 vvdi-prog-mercedes-adapter-how-to-use-4 vvdi-prog-mercedes-adapter-how-to-use-5


Parameters for BMW Single ECU Programming with ISTA Expert Mode

Parameters and tips for you guys to add for BMW single module programming with Rheingold Expert Mode:


Try Single Ecu Programming with adding this Parameter to ISTAGUI.exe.config:
<add key="BMW.Rheingold.Programming.DeactivateIntegrationLevelValidation" value="true" />
Try only selectability of ECU's.

Like this:

<!-- Enable Programming -->
<add key="BMW.Rheingold.Programming.ExpertMode" value="true" />
<add key="BMW.Rheingold.Programming.Enabled" value="true" />
<add key="BMW.Rheingold.Programming.PsdzDataPath" value="C:RheingoldPSdZdata_swi" />
<add key="BMW.Rheingold.Programming.NoFinalTherapyPlanCalculation" value="true" />
<add key="BMW.Rheingold.Programming.DeactivateIntegrationLevelValidation" value="true" />

And this:



Some ECU modules need flash with 2 or 3 cooperated modules. ISTA does not allow program only one, so you need program module you want + other ECU connecting with programmable module.

Some modules can be programmed by one without touching others ECUs.

Want program by one module or code use BMW STANDARD TOOLS (Tools32, NFS, WinKFP, NCSExpert etc)
Expert mode does not mean that you can program only 1 module. You can but not always.


QHas anyone figured out single module programming for ISTA4? Only reason to keep ISTA-P held back is single module programming via expert mode for programming vehicles with unofficial retrofits.

A: Use partial programming, with double click on module choose between coding, programming and no action.

QDoes this allow modules to be 'hidden' from the update?

AWhen you choose software update and after finishing measures plan calculation you stay on confort tab, change for expert tab and there you can select or unselect the units that should be programmed or coded , then calculate again measures paln and you will see the choosen units plan to be programmed and/or coded.

If you don't want to update your CCC, CIC choose partial programming, after that you're choosing which modules to be updated without fear that some other will be updated.


ISTA/P Expert Mode

ista-p-expert-mode-10 ista-p-expert-mode-9 ista-p-expert-mode-8 ista-p-expert-mode-7 ista-p-expert-mode-6 ista-p-expert-mode-5 ista-p-expert-mode-4 ista-p-expert-mode-3 ista-p-expert-mode-2 ista-p-expert-mode-1



Mini ACDP Porsche BCM add new keys

Good to know: Yanhua Mini ACDP is verified to work no issues with Porsche BCM.




You need:

Yanhua Mini ACDP programer

Module 10

Support: 2010~2018 Porsche - all models!


1: No need disassembling and soldering

No need to remove components

No need to cut the line

No risk of damage to the BCM computer board

2: All in one

Set anti-theft data reading and writing, anti-theft data calculation, key programming in one.

3: The interface board replaces the welding wire, the pin connect with intelligent detection, and the data reading and writing is safe and reliable.

4: With the key refresh function

No longer afraid of loss caused by key be locked.

How to add new Porsche with ACDP:

Upload images...

mini-acdp-porsche-add-new-key-2 mini-acdp-porsche-add-new-key-3 mini-acdp-porsche-add-new-key-4 mini-acdp-porsche-add-new-key-5 mini-acdp-porsche-add-new-key-6 mini-acdp-porsche-add-new-key-7 mini-acdp-porsche-add-new-key-8

The detail can be found in the video:


Pls prepare OBD+ICP adapter, BCM interface board, BCM module, BAV adapter and blank key

It is forbidden to cut ACDP power off during the process of adding a key

Pls store the original and programmed EEPROM/DFLASH data as prompts.