topblog Ivoire blogs

19/07/2018

What is Cummins INSITE Fault Codes

Look here: What’s new of Fault Codes in Cummins INSITE Version 8?

 

What is Cummins INSITE Fault Codes:

Fault codes are Cummins way of letting you know that your engine has a problem. Every sensor and circuit on your engine has a certain expected reading and voltage signal. These signals are monitored constantly by the Cummins ECM. If values rise above or below expected, the ECM will log a code.

If the error has occurred but is not happening at the time of diagnostics, it is known as an Inactive Fault. If the error is happening while you diagnose, it is known as an Active Fault.

All codes can be classified as either Active or Inactive, and their status can be determined by flash codes or through the Insite Electronic Service Tool.

 

What is new of Fault Codes in Cummins INSITE version 8:

 

– Fault Codes window displays an engine's fault data

– Fault Codes include both engine faults and engine protection faults

– Each fault is represented by a Cummins fault code

  • Indicates a specific malfunction or abnormal condition within the controller, subsystem, or

engine

– Ability to link to Fault Information System for Troubleshooting Information

cummins-insite-version-8-fault-codes-3 cummins-insite-version-8-fault-codes-1 cummins-insite-version-8-fault-codes-2

 

Whats new in Fault Codes Sorting in Cummins INSITE 8:

  • Fault Codes can be sorted by either the column, or by right click for multiple column sorting
  • The Fault Code data can be sorted by clicking on the column header for a single column sort
  • The data will be sorted based on the selected column in ascending order. Click on the column header again to resort the data in descending order

Note: Sorting can only be used on the Fault Code, Status, Count, or Lamp columns

cummins-insite-version-8-fault-codes-4

Whats new in Fault Codes Wrap Up in Cummins INSITE 8:

  • Fault Codes window shows active and inactive Fault Codes
  • Alternate click

– Link to Fault Information System for Troubleshooting information

– Clear Inactive Faults

  • Links to Troubleshooting available in the Fault Information System

Where to get the Cummins Insite 8:

Here you go.

Cummins Insite 8 Pro Version:

http://www.cardiagtool.co.uk/cummins-insite811199-lite-50...

Cummins Insite 8 Lite Version:

http://www.cardiagtool.co.uk/cummins-insite811199-pro-500...

Cummins Insite Lite vs. Cummins Insite Pro

FUNCTIONALITY LEVEL

Cummins INSITE LITE

 

Cummins INSITE PRO
Features No Calibration Download Full Functionality
View Trip Information
View Fault Trees
Fault Information System
View Troubleshooting Steps
View Parameter Settings
View Wiring Diagrams
View Engine Dataplate
Driver Rewards
Data Monitor/Logger
Reset Trip Information
Reset and Clear Fault Codes
Set Engine Features (on/off)
Set/Adjust Parameters
Set/Change ECM Passwords
Create Settings Templates
Create Work Orders/Jobs
ZAP-It Functionality
Run Special Features
Run Diagnostic Tests
Read/Retrieve Calibration Files  
Load Engine and Programable Datalink Device Calibrations  

17/07/2018

Immobilizer PIN Code Reader Tips before Your Purchase

Tips and guides: Which immobilizer PIN code reader to buy & Where to?

What is an immobilizer PIN code?

immobiliser codes using the vehicle identification number (VIN) which you will find printed inside the vehicle registration document V5 or the registration number depending on the car or van. To get a Transponder code or Emergency key access code (EKA)

How to choose a good auto PIN code reader?

NSPC001 Nissan Pin Code Reader With 100 Tokens: for all Nissan

  1. Support all Nissan cars that can read BCM code to calculate pin code.
  2. Can transfer 5-digit code to 4-digit code, the newest 20-digit code to 20-digit code.

 

Pin Code Calculator for Hyundai & Kia: works for Hyundai & Kia from 1996-2016

for cars between 2006-2007: Pin code calculation offline from VIN numbers
for cars from 01/2006 to 12/2016: Pin code and key cutting code calculation online from VIN numbers

 

FMPC001 Incode Calculator for Ford/Mazda: for new and old For Mazda

for old Ford and Mazda: 6 digits OUTCODE transfer to 4 digits INCODE

for new Ford and Mazda: 2014+ new Focus3, 2010+ Kuga, 2014+ Mondeo, etc.

 

Note: With built-in 50 tokens for new models, deduct 1 point for each reading of new model. No deduction for old models.

 

V-A-G PIN Code READER: for VW, Audi, Skoda, Seat, Bently, Porsche

for vehicles made by the VAG group: OBD read security codes

PIN Code Reader for Chrysler: for Chrysler Type 2

for car type Chrysler (Type 2) : read PIN

Read data from Immobilizer controller and show the pin code on the screen of the device directly

VPC-100 Pin Code Reader with 500 TOKENS: for universal cars

for ACURA, AUDI, CHERY, CHEVROLET, DACIA, FORD, HONDA, JAGUAR, KIA, LEXUS, LINCOLN, MARUTI, MAZDA, MERCURY, MITSUBISHI, NISSAN, QIRUI, RENAULT, LAND ROVER, SCION, SEAT, SKODA, SMART, SUZUKI, TOYOTA, VW: 500 free tokens to read pin codes

Note: The token consumption rate in the web mode is two times of that in VPC-100 machine. For example, if calculate PINCODE for Ford need 10 tokens in VPC-100 machine, then it need 20 tokens in website mode.

....

Where to buy PIN code reader for all cars?

Look here:  http://www.carkeydeals.com/wholesale/pin-code-reader/... 

16/07/2018

VDI MB TOOL W210 Password Calculation

This is how to calculate password of Mercedes W202 W208 W210, using VVDI MB V4.1.0 - the latest version released on 07-2018.

 

The released notes saying W202 W208 W210 Password Calculation is available

VVDI-MB-TOOL-W202-W208-W210-password-calculation-1

The tutorial of W202 W208 W210 Password Calculation

 

Step 1: Select working key, communicate mode and chassis

Waring: this step should be done on the bench

 

Step 2: Press “Data Acquisition” to start

- press data acquisition, connect device->MB power adapter

- connect IR adapter to VVDI-MB TOOL

- data acquisition

- 50% complete

- 100% complete

- save acquisition data

 

Step 3: Press “Upload Data” to send acquisition data

 

Step 4: Press “Query result” to get the key password

VVDI-MB-TOOL-W202-W208-W210-password-calculation-2 VVDI-MB-TOOL-W202-W208-W210-password-calculation-3 VVDI-MB-TOOL-W202-W208-W210-password-calculation-4

Tested by real pros with VVDI MB firmware 4.0.0...upload images

VVDI-MB-TOOL-W202-W208-W210-password-calculation-5 VVDI-MB-TOOL-W202-W208-W210-password-calculation-6 VVDI-MB-TOOL-W202-W208-W210-password-calculation-7 VVDI-MB-TOOL-W202-W208-W210-password-calculation-8 VVDI-MB-TOOL-W202-W208-W210-password-calculation-9 VVDI-MB-TOOL-W202-W208-W210-password-calculation-10 VVDI-MB-TOOL-W202-W208-W210-password-calculation-11

Job’s done!