topblog Ivoire blogs

28/06/2019

 Obdstar X300 dp Plus latest update

OBDStar Update information of  June 2019, This update is for Obdstar X300 dp and Obdstar X300 dp Plus.

IMMO

VW

Optimized the key learning function

Nissan

1. Increased 12-digit Pincode smart key system type3

2. Increased 12-digit Pincode IMMO system type3

BAIC

1. Optimized Senova D50 key programming

2. Optimized Hyosow S6 smart key programming procedure

3. Increased BAIC new energy EU5 smart key system group 2 Initialization enter into system scanning mode

Ford

1. Optimized Courier(Tourneo Courier) key programming

2. Optimized Ecosport Pincode algorithm in key programming

3. Optimized Kuga Pincode algorithm in smart key programming

Chrysler

1. New Increased: 300/300C(2015-2017/2018-),  300(2019),  PACIFICA(2018/2019)

VIPER(2015-2017),  CHALLENGER(2015-2017/2018/2019),  RAM(2018)

CHARGER(2015-2017/2018/2019),  DURANGO(2014/2018-2019),  WRANGLER(2018-2019)

2. Increased 2017- Renegade smart key system

3. Increased 2017-2018 Compass smart key system

4. Increased 2018-2019 Grand Cherokee smart key system

5. Optimized 300C(2005-2006)(2015-2017) function menu

6. Optimized US-Canada area 2014-2015 Grand Cherokee key programming

7. Optimized US-Canada area 2015-2016 Renegade key programming

8. Optimized US-Canada area 2008 Grand Cherokee key programming

9. Optimized US-Canada area 1998-2000 300M key programming security algorithm

Mazda

1. Increased 2017- CX9 smart key programming
2. Optimized 2018 CX4 smart key system ignition on function
3. Optimized 2018 CX4 smart key system all keys lost programming procedure

Renault/Dacia/Lada

1. Optimized Megane

2. Optimized 2012 Fluqnce flipkey

3. Optimized 2015 Dacia Logan key programming

Great Wall

1. Increased data index ID

2. Solved Haval H6 2017- smart key programming failure

Fiat

1.Increased Ferrari 612 Scaglietti and California

2.Optimized 2016- Maserati smart key IMMO data reading

3.Optimized BSI_MARELLI_70F3633_95320 type EEprom reading

4.Revised Iveco key programming type LIER_BCM and DELHP_IMMO prompt text

Venucia

Increased and optimized D60 smart key system

Foton

1. Optimized Tunland remote system
2. Increased the help data ID

Geely/SMA/Englon

Optimized Emgrand EV450 UMC smart key system

GM

1. Solved Excelle 2018- prompt 7F E3 problem

2. Solved GL6 2017- security verification failure

JMC

Increased the data ID

Honda/Acura

Increased the data ID

Luxgen

Increased the data ID

Roewe/MG

1. Increased the data ID

2. Increased Roewe E50 IMMO system

3. Increased Roewe RX8 IMMO system

4. Increased Roewe Ei5 IMMO system

5. Increased MG GS smart key system

6. Increased MG MG6 smart key system

7.  Increased MG ZS smart key system

8. Increased Roewe 750 (new) IMMO system

9. Optimized Roewe RX3 IMMO system (non-smart)

Cluster Calibration

Ford

1. Revised FOCUS 2018- to be FOCUS 2019

2. Optimized 2017- Ecosport cluster calibration procedure

3. Increased 2017- EcoSport/2017- Carnival/2018- Focus/2018- Transit Custom

Great Wall

Increased Hover H6 and H8 cluster calibration function

Mercedes-Benz

Optimized Benz B series W245 cluster calibration function

Peugeot/Citroen

1. Shielded the Citroen C5 menu

2. Increased the model‘help’ index
3. Shielded Citroen BSI_P0X extra function menu(recover FLASH)

VW/Audi/Seat/Skoda

Updated the function of automatically recognize the dashboard type

Kia/Hyundai

Optimized the algorithm file of encrypted chip

APK Software

Increased Java Script in Help section, support the online automatic multi-language translation

26/06/2019

MB SD Connect Compact C4 software Latest Update

MB SD Connect Compact C4 C5 HDD Super Engineer Software  Newest Update to V1019.7.

19062315613455983468

V2019.7 MB SD C4  Software includes:

Xentry 07.2019

DAS 07.2019

EPC 11.2018

WIS 11.2018

SDmedia

Vediamo

Vediamo Database

Star Finder 2008$2016

PL73

DTS
Support Mer-cedes Benz Cars After Year 1989

Passenger Car Support List:

A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126),

E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140) SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197),

M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221),S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216),

CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107),SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)

Van Support List:

MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)

Truck Support List:

Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series

Unimog Support List:

U20, UGN, UHN

Bus Support List:

TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/O403, CONECTO, O404, O405-O408,

Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/OH, OH, OH368, OF, OF384, LO, O400,

FURTHER MODEL SERIES

Super Sports Car Support List:

SLR(199)

"Introduction to DTS-monaco"

1.DTS-monaco is the official software used in Daimler-Benz development engineers.

2.DTS Monaco is a controller for vehicle diagnosis and general engineering test terminals of the controller functions. The Monaco is derived from the name used for modular Analyzer traffic.

3.DTS Monaco covers all areas of engineering, testing, and production test preparation for all tasks

4. in the Mercedes-Benz maintenance tests it is the ultimate authority, perfect support for C4 (SDconnect) and (Ecom) hardware (currently Das-xentry. Vediamo lower privileges)

"Features"

Quick Test; the vehicle ECU for rapid testing, test at the same time, you can choose to edit more functionality.

Variant Coding; add VO-delete VO variation functional.

ID identification; one-click to read the whole car and saved, all module programming.

Complete Variant Coding; read all ECUcoding vehicle data in one pass, write again to the vehicle, completely offline.

Diagnostic Services and advanced features can see internal and external data you choose modules, open computer authorization (not authorized), activate the ECU reset ECU, modifying the original chassis number.

Flash programming; completely off-line programming,

Diagnostic Trouble Code diagnosis module DTC trouble code.

ECU Exchange; two of the same ECU, are exchanged by reading the data to import the data.

Symbolic trace: recording a trace file%

Basic programming set code function:

1 unit for off-line programming

2, a key to off-set code

3, W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4, 222, 205 installing fragrance systems

5, 2015, paragraph 212, changing traffic light permanently lit

6, 212, 204, adding electric ear

7, 222 205 HU5 traffic solution for DVD video

8, W164 closed recycling system

9, W205, retro atmosphere lamp

10, 205, 222 adding electric ear electric trunk, the trunk kicking function

11, 166, how to modify the gateway set up codes

12, 166 meters finished degrees Fahrenheit to degrees Celsius

13, US standard maintenance mileage be set to the number of miles

14, 164 disabled diesel particle filter regeneration system

15, 166 canceled urea

16, 205 added electric rear vision mirror

17, HU45 regional Chinese resolve lock

18, W204 W166 foldable rear-view mirror

19, change the 166 on board, display in Celsius

20, W212 disable ECO configurations

21, activate the HOLD function ABR2XT

22, open W22 looked up appears

23, the AMG sports package enabled W212

24, the air bag computer reset factory State W166

25, to increase the brightness of the color instrument cluster s W222

26, 722.97g to install the steering wheel shift paddles

27, W221 AMG W216 dashboard style

28, airbag ECU unlock W204 212

29, disabled child seat recognition sensors W221

30, opening rear fog lamps as spare brake lights with W222

31, increasing engine power MED177

Find more: http://www.cardiagtool.co.uk/producttags/2018-mb-c4-c5.html

25/06/2019

How to install Caterpillar SIS 2018.

Caterpillar SIS 2018.1 can be installed on Windows 8. Read step-by-step guide as follows.
Here you go.

Step 1: Install RER10, RER11, RER12 under 2015
Step 2: Use daemon to open Setup RERD0010/11 / 12.nrg
Step 3: Get lincense.dat” file
Step 4: Set Environment variables
Step 5: Cover 2018 cat sis software

In detail…

Step 1: Install RER10, RER11, RER12 under 2015
Note: Use daemon to open SS11B, setup. Then install RER10, RER11, RER12 under 2015
Go to My computer-> 2018 Caterpillar SIS (F:) -> IE8-WindowsXP-X86-ENU
caterpillar-SIS-2018.1-installation-on-windows-8-1
Update the Internet Explorer 8
caterpillar-SIS-2018.1-installation-on-windows-8-2
Then restart the computer
Select My computer-> 2018 Caterpillar SIS (F:) -> Adobe Reader 920_en_us
caterpillar-SIS-2018.1-installation-on-windows-8-3
Install Adobe Reader 9.2 successfully
Then click “Finish” to exit setup
Install NET Framework 4
caterpillar-SIS-2018.1-installation-on-windows-8-4 caterpillar-SIS-2018.1-installation-on-windows-8-5
NET Framework 4 has been installed
Open DAEMON Tools Lite file and install
Select language: English
caterpillar-SIS-2018.1-installation-on-windows-8-6
Select “Free License” and click “Next”
caterpillar-SIS-2018.1-installation-on-windows-8-7

Choose the features of DAEMON Tools Lite you want to install
Then click “Next”
caterpillar-SIS-2018.1-installation-on-windows-8-8
Install DAEMON Tools Lite successfully
Run DAEMON Tools Lite
Click “Add image”
Go to My computer->2018 Caterpillar SIS (F:)-> 2018 Caterpillar SIS -> SS11B
caterpillar-SIS-2018.1-installation-on-windows-8-9
Mount “SS11B.iso”
Install NET Framework 2.0
caterpillar-SIS-2018.1-installation-on-windows-8-10
Choose setup language: English
Select applications you want to install service software
caterpillar-SIS-2018.1-installation-on-windows-8-11
After finishing the setup, please insert the SIS “DVD Setup” Disk.
Go to “SS11B.iso”->2015->RERD0010
Mount “RERD0010.iso”
Note: Install SIS Data Setup #1 disc is finished. Please click OK, then insert the SIS Data setup #2 disc to complete the data installation.
caterpillar-SIS-2018.1-installation-on-windows-8-12
Right click “Add image”
Select 2015->RERD0011
Mount “RERD0011.iso”
Note: The InstallShield Wizard will install SIS Monthly Image Update on your computer. To continue, click Next.
Setup of disc #2 is finished. Please complete current install dialogues and then proceed with setup disc #3 of 3.
caterpillar-SIS-2018.1-installation-on-windows-8-13
Right click “Add image”
Select 2015->RERD0012
Mount “RERD0012.iso”
Install successfully
Remove all the DAEMON Tools Lite images
caterpillar-SIS-2018.1-installation-on-windows-8-14

Step 2: Use daemon to open Setup RERD0010/11 / 12.nrg
Right click “Add image”
Select 2018 Caterpillar SIS ->RERD0010
caterpillar-SIS-2018.1-installation-on-windows-8-15
Mount “RERD0010.isz”
Install SIS Data Setup #1 disc is finished
Then repeat all steps above until all the isz images completed.

Step 3: Get lincense.dat” file
Go to C disk and new create the flexlm file
caterpillar-SIS-2018.1-installation-on-windows-8-16
Click on “ Run” and input cmd, then input “ipconfig-all”
Get the MAC address and send it to the dealer to get “lincense.dat” file, then paste the “license.dat” file to C:flexlmlicense.dat”caterpillar-SIS-2018.1-installation-on-windows-8-17

Step 4: Set Environment variables

Right click my Computer-> properties-> Advanced-> Environment variables->New create, input “CATLMD_LICENSE_FILE” and next “license.dat” file to C:flexlmlicense.dat”, click on “OK”
caterpillar-SIS-2018.1-installation-on-windows-8-18
Step 5: Cover 2018 cat sis software
Copy “sis.exe” and “sisserver.exe” to the installed catalogue to cover 2018 cat sis software installation procedure
caterpillar-SIS-2018.1-installation-on-windows-8-19
Install PTC Arbortext IsoView 7.3
caterpillar-SIS-2018.1-installation-on-windows-8-20
Installing SIS Djvu
caterpillar-SIS-2018.1-installation-on-windows-8-21
Run SIS
Import SIS Users
caterpillar-SIS-2018.1-installation-on-windows-8-22 caterpillar-SIS-2018.1-installation-on-windows-8-23
Use the ID and password to login
Access to agreement screen
Select “Caterpillar Authorized OEM”, then click YES
caterpillar-SIS-2018.1-installation-on-windows-8-24
Note: Do you want to start the SIS integration functionality?
Click YES
Operate the service information system according to your need
caterpillar-SIS-2018.1-installation-on-windows-8-25 caterpillar-SIS-2018.1-installation-on-windows-8-26
Done!