topblog Ivoire blogs

11/03/2019

eCOM to work with Xentry 7/18 enabling DOIP

I want help to configure eCOM to work with Xentry 7/18 enabling DOIP

Code:

C:Program Files (x86)Mercedes-BenzXentrybinPDUSDConnectPDUAPI_I+ME_ACTIA_XS.ini
then Go to section [eCOM PFW]
Edit value of key "Firmware" to "eCOM_SDconnect_24_Fw.zip":
Firmware=eCOM_SDconnect_24_Fw.zip
Here is configuration Protocol

Control Panel ? Network and Internet ? Network Connections ? Local Area Connection ? Properties ? Internet Protocol Version 4 (TCP / IPv4) ? Properties ? Use the following IP address (check)

Ip For eCom
IP address 169.254.255.42
Subnet mask 255.255.0.0

Use the address of the next DNS server (check)

Preferred DNS server blank
Alternate DNS server blank

Advanced setting ? Add

Ip For SDconnect to make Toolkit alive with eCOM
172.29.127.100

result
169.254.255.42 255.255.0.0
172.29.127.100 255.255.0.0

OK ? OK ? Close

With this, "eCom & SDconnect" works within Xentry.

Note : This config working 100%

Here is eCOM with Xentry with test on DoIP!

eCOM_xentry_doip

Écrire un commentaire