topblog Ivoire blogs

30/10/2018

Mini Copper 2010 CAS 3+ remote solution: Lonsdor K518ISE done!

New test updated: Lonsdor K518ise key programmer successfully made new keys to BMW Mini Copper 2010 CAS 3+
Programming tool: Lonsdor K518ise off cardiagtool.co.uk
Car: Mini Copper 2010 CAS 3+

Procedure:

lonsdor-k518ise-mini-coper-2010-cas3-1

Connected via OBD

lonsdor-k518ise-mini-coper-2010-cas3-2

Two remotes, one working and one not

lonsdor-k518ise-mini-coper-2010-cas3-3 lonsdor-k518ise-mini-coper-2010-cas3-4 lonsdor-k518ise-mini-coper-2010-cas3-5

In Lonsdor K518:

Immobilizer - BMW - select by type - CAS2/CAS3 - program key

lonsdor-k518ise-mini-coper-2010-cas3-6

Lonsdor will start to make a dealer key to Mini Cooper:

1 this can add one key (select blank position)

2 this can replace the original key (choose non-blank position)

3 this can generate key via OBD or K518 key slot

...

lonsdor-k518ise-mini-coper-2010-cas3-7

Pls press the start button

Communicating...

Lonsdor K518 read out CAS part number and type (it’s CAS3+)

lonsdor-k518ise-mini-coper-2010-cas3-8

K518 read out vehicle identification number, cas part number, diagnostic code, key tooth code, remote key frequency (315MHz), ignition

lonsdor-k518ise-mini-coper-2010-cas3-9

Xhorse test the remote

lonsdor-k518ise-mini-coper-2010-cas3-10

K518ise is reading RAM, for about 1min..

lonsdor-k518ise-mini-coper-2010-cas3-11

Remove the key from the ignition switch

For a smart key, take it outside the car

Ok to continue

lonsdor-k518ise-mini-coper-2010-cas3-12

Safety checking

lonsdor-k518ise-mini-coper-2010-cas3-13

Reading key information

lonsdor-k518ise-mini-coper-2010-cas3-14

Current CAS key position info

Select key 4 and key slot generation

lonsdor-k518ise-mini-coper-2010-cas3-15

Note: if the car had been programmed but failed, pls unlock the key and restore cas data first

lonsdor-k518ise-mini-coper-2010-cas3-16

Select remote key

lonsdor-k518ise-mini-coper-2010-cas3-18 lonsdor-k518ise-mini-coper-2010-cas3-17

Pull K518 key slot to the right and insert the key to be programmed (to identify if the key is legal and to pre-process key)

lonsdor-k518ise-mini-coper-2010-cas3-19

Current key is legal

lonsdor-k518ise-mini-coper-2010-cas3-20

Writing key info

lonsdor-k518ise-mini-coper-2010-cas3-21

Pls put the generated key into the key slot for 5 sec

lonsdor-k518ise-mini-coper-2010-cas3-22

If the vehicle cannot be started or direction lock shows on the dashboard, pls synch ELV or DME accordingly

lonsdor-k518ise-mini-coper-2010-cas3-23

Complete!

lonsdor-k518ise-mini-coper-2010-cas3-24

Test the new key

lonsdor-k518ise-mini-coper-2010-cas3-29 lonsdor-k518ise-mini-coper-2010-cas3-25 lonsdor-k518ise-mini-coper-2010-cas3-26 lonsdor-k518ise-mini-coper-2010-cas3-27 lonsdor-k518ise-mini-coper-2010-cas3-28

Done! Lonsdor K518 made a new key to mini cooper

Les commentaires sont fermés.