topblog Ivoire blogs

25/04/2018

How to use Xhorse wireless remotes with VVDI Key Tool

This is the instruction for the wireless/wired remotes from Xhorse.

This remote is a Xhorse 3-button remote...there is no 'Panic' button.

3-button wireless/wired remotes from Xhorse:

http://www.xhorsetool.com/wholesale/car-key-blank/

How to use Xhorse wireless remotes with VVDI Key Tool:

Using the VVDI Key Tool, select Product Remote and select the remote you would like to generate.

Hold remote to ariel portion of tool during generation. Install proper blade for your application

Program remove to vehicle as you would an OEM remote

Note, the WIRELESS remote head key has the chip already integrated into the electronics board. No disassembly is necessary and no chip installation is necessary, unlike wired models.

How to use Xhorse wired remotes with VVDI Key Tool:

Open remote and remove battery

Connect data cable to white connector on remote PCB board and plug into VVDI Key Tool

Using the VVDI Key Tool, select Product Remote and select the remote you would like to generate

Disconnect cable, reinsert battery, and reassemble remote. Install proper chip and blade for your application.

Program remove to vehicle as you would an OEM remote

More Xhorse: http://www.xhorsetool.com

Les commentaires sont fermés.