topblog Ivoire blogs

29/03/2018

Which Launch tool for Truck

Looking for a Launch scan tool for truck diagnostic & programming... and here is what i found on the web. Hope it’s helpful to you too.

 

Products Launch x431 V+ HD Launch X-431 PRO3 V2.0
Image   launch-x431-v-8inch-heavy-duty  launch-x431-pro3-heavy-duty
Price €1,065 €1,129
Operating system Android 5.1 Android 5.1
CPU Quad-core 1.3GHz processor Quad-core 1.3GHz processor
Battery 7000mAh rechargeable polymer lithium battery  7000mAh rechargeable polymer lithium battery
Memory 1GB 1GB
Storage capacity 16GB 16GB
LCD 10.1 inch 10.1 inch
LCD resolution 1280 x 800 1280 x 800
Touch screen Capacitive touch screen Capacitive touch screen
Cameras 5.0 mega pixels rear and 2.0 mega pixels front 5.0 mega pixels rear and 2.0 mega pixels front
Wi-Fi Supported, 802.11a/b/g/h Supported, 802.11a/b/g/h
Bluetooth Supported Supported
Working temperature 0℃ ~ 45℃ 0℃ ~ 45℃
Storage temperature -20℃ ~ 70℃ -20℃ ~ 70℃
Update The first year: free update;Then 999USD/year The first year: free update;Then459USD/year

 

So, in terms of specification, the Launch x431 scanners above are the same. The biggest the difference is the price and update cost.

Actually, both share the same features also, including functions and vehicle list.

Function: same!

Full-system diagnostics: Read DTCs, Clear DTCs, Read Data Stream, Read freeze frame

Actuation Test: confirmed!

Special Functions: confirmed!

ECU Programming: confirmed!

Truck list: same!

Both Launch x431 HD cover Asian, European, American and Chinese heavy duty trucks.

USA: FREIGHTLINER, INTERNATIONAL, KENWORTH, PETERBILT, STERLING…

Europe: M E RCE DES- BE NZ MAN VOLV0 SCANIA IVEC0 DAF RENAU LT

Asian: HIN0, FUS0, ISUZU, UD, HYUNDAI, ASHOKLEYLAND…

China: DONGFENG SERIES FAW JIEFANG SINOTRUK FOTON AUMAN JAC SERIES YUTONG KINGLONG……

http://www.launchx431v.org/

27/03/2018

VXDIAG VCX NANO GM work with TIS2000

VXDIAG VCX NANO GM + TIS2000:
IT works!! ok for anyone trying to use the VXDIAG GM nano with SPS this is what you need to do (order is important):

*** please note you cannot use the VM that the VXDIAG package comes with (GDS2 VM). It’s configured in such a way it won’t work with the dongle crack and caused me a lot of head scratching to find this out.

1. Create a windows XP 32bit VM using VMWare Player
2. Make sure you add an LPT port (set to auto, not connected on startup). It doesn’t matter if your actual PC has an LPT port or not this is needed for the dongle crack later.
3. Install VMWare tools for your VM

4.After you have the windows VM up and running install the BOSH MDI drivers found (theMDI drivers on the driver disk and vxmanager installer wouldn’t install on my xp 32bit VM but the one from bosh does).

5.From the driver disk or from allscanner.com install the VXDIAG MDI package with pass thru driver (VXDIAG MDI manager or VXDIAG Manager)

Free download tis_data_1.iso, tis_data_2.iso, GM-NAO-TIS200-3_2008.iso, TIS2000DongleCrack.rar on the web by yourself or buy a tested TIS2000 crack such as http://www.cardiagtool.co.uk/tis2000-cd-and-usb-key-for-g...  and the like

6. (files / instructions in the updated.txt you may need to click the link more than once if you get an error when downloading)
7. Mount the tis_data_1.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) this will start the auto install of the TIS2000 2007.3 software)
8. All options can be installed using the default selections however make sure you check the install checkbox above the parallel security device on the one screen.
9. After installation is complete you can extract the TIS2000DongleCrack.rar and copy the folder to the desktop of your VM
10. Go into the TIS2000DongleCrack folder locate the drivers folder and open it, run the DDINST32.EXE (if you get a registry error you didn’t install an LPT port in your VM), select Express and it should install the files then click ok / Exit to close.
11. Go back to the main TIS2000DongleCrack folder and copy SCAControlUI.exe and Id.dll to c:Program Filescosidsbin (it will prompt to replace id.dll select yes).
12. Go back to the main TIS2000DongleCrack folder into the Dongle folder and copy the 2 files in there to c:windowssystem32 (the dongle crack is now installed)
13. Now mount the tis_data_2.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) and open TIS2000 (double click the icon on your desktop) when TIS opens it will ask you if you want to upgrade click yes.
14. After the upgrade completes mount the GM-NAO-TIS200-3_2008.iso in your VM (use the virtual cdrom in vmware player and attach to iso file) and open TIS2000 (double click the icon on your desktop) when TIS opens it will ask you if you want to upgrade click yes.
15. After the upgrade completes you have successfully installed TIS2000 2008.3 and the Dongle crack, now we need to configure TIS to use the VXDIAG GM nano
16. Open TIS2000 from the icon on your desktop, select Configuration menu from the top and select IO Management.
17. Click the Driver button, click the Browse button, locate the j2534.dll file in the window and click open (installs the J2534 Pass Thru Driver)
18. Now click the Add button (in IO management) enter exacly “Generic Pass Thru” in Logical Name and select “J2534 Pass Thru Driver” in the Driver drop down, click OK.
19. Select Generic Pass Thru in the list and click Properties, in the Device Name drop down select VXDIAG, (ALLScanner) and click ok then click close to close IO Management.

Now TIS2000 software is installed and configured all you have to do is connect your VXDIAG device to the PC / VM. To do this first use a usb and connect it to the PC then in the VMWare player menu go in removable devices and connect the Future Devices USB to serial converter. At this step my windows install didn’t have the basic usb to serial drivers so I connected the VM to the network (if not connected use the VMWare player menu to connect the network) and windowsdownloaded them from the net and installed the device as com3. you are now good to go.

At this point you can now click on SPS in TIS2000 select Generic Pass Thru as your device and your good to program!!

Satisfied, VXDIAG VCX NANO GM device works as a clone to the GM MDI.

Credits to wizzardsl writing for the how-to’s for us.

23/03/2018

Auro OtoSys IM600 do FEM/BDC Renew

There are two options are available on Auro OtoSys IM600 when accessing FEM/BDC Renew:

l Copy Data Update: When the immobilizer information of the vehicle can be read

from the original FEM/BDC module, perform this function to read the information

and write it into the replacing FEM/BDC module.

l Calculate Data Update: When the immobilizer information of the vehicle cannot

be read from the original FEM/BDC module, perform this function to generate

the information via the input VIN code, vehicle frequency and engine ISN code

and then write it into the replacing FEM/BDC module.

Today, i’ll make a brief introduction of FEM/BDC Renew with OtoSys IM600

auro-otosys-im600-renew-bmw-ecu-5 auro-otosys-im600-renew-bmw-ecu-1 auro-otosys-im600-renew-bmw-ecu-2 auro-otosys-im600-renew-bmw-ecu-3 auro-otosys-im600-renew-bmw-ecu-4

First, FEM/BDC Renew via Copy Data Update on OtoSys IM600

l Preparation:

  1. Attention: If there’s an ELV in the vehicle, the ELV may not be unlocked after

performing FEM/BDC Renew. You’ll need to solve the locked problem yourself, so

please start the operation with careful consideration.

  1. To perform the Copy Data Update function, a working key or the engine ISN code is

needed.

  1. The hardware version of the original and replacing modules can only vary slightly.

Otherwise, the DTCs of the vehicle may not be cleared.

  1. Remove the FEM/BDC module from the vehicle.
  2. Conduct ECU preprocessing on the replacing (used) module and the original module

to make them able to learn keys. No ECU preprocessing is needed for the replacing

module if it is a brand new one.

  1. Prepare a blank key.

l Procedures:

Look at http://www.cardiagtool.co.uk/upload/service/im600-bmw-ecu... page 1-26

Second, FEM/BDC Renew via Calculate Data Update on OtoSys IM600

l Preparation:

  1. Attention: If there’s an ELV in the vehicle, the ELV may not be unlocked after performing FEM/BDC Renew. You’ll need to solve the locked problem yourself, so please start the operation with careful consideration.
  2. Attention: All original keys won’t be accepted when performing the Calculate Data Update function.
  3. To perform the Calculate Data Update function, the VIN code, vehicle frequency and engine ISN code are needed. This information can be obtained via Expert mode.
  4. The hardware version of the replacing module can only vary slightly from that of the original module. If two versions vary considerably, the DTCs of the vehicle may not be cleared.
  5. Remove the FEM/BDC module from the vehicle.
  6. Conduct ECU preprocessing on the replacing (used) module and the original module to make them able to learn keys. No ECU preprocessing is needed for the replacing module if it is a brand new one.
  7. Prepare two blank keys.

l Procedures:

Look at http://www.cardiagtool.co.uk/upload/service/im600-bmw-ecu... page 26-41

More solutions of FEM/BDC programming:

VVDI2 Xhorse:

http://www.cardiagtool.co.uk/vvdi2-commander-key-programm...

Tips: http://blog.cardiagtool.co.uk/vvdi2-bmw-fembdc-codingprog...

Lonsdor K518ise:

http://www.cardiagtool.co.uk/lonsdor-k518ise-key-programm...

Tips: http://blog.cardiagtool.co.uk/lonsdor-k518ise-bmw-functio...