topblog Ivoire blogs

06/02/2018

DIY CarProg A9 Test Adapter for CarProg Damaged Parts - 4

CarProg Error: Damaged Parts - 4... How to solve? Here you go

carprog-damaged-parts-4

Go to build a A9 - CarProg Hardware Test adapter on your own

carprog-a9-test-adapter-1

carprog-a9-test-adapter-2

Carprog A9 adapter pinouts

carprog-a9-test-adapter-3

If you think it difficult, buy one from the Carprog original http://codecard.eu
Then, make the A9 Adapter and everything will be OK in the end

carprog-Damaged-parts-4-solution-2 carprog-Damaged-parts-4-solution-1

carprog-Damaged-parts-4-solution-5 carprog-Damaged-parts-4-solution-3 carprog-Damaged-parts-4-solution-4

Maybe, some guys may be unlucky if even do so. And that is another possible reason:

the Voltage is too large and heat is not good ---> overheating then burn the 4th mcu chip. Replace the 4th chip using a heat gun or sent it back to seller to repair your carprog full.

You might want to know:

Carprog adapters full kit: http://www.cardiagtool.co.uk/cables-for-carprog-full-v401...

Carprog A1 adapter for CANBUS NO WORKING:

http://www.cardiagtool.co.uk/a1-cable-for-carprog-full-v4...

Carprog A6 adapter used for EEPROM in-circuit programming and can be used with all CARPROG software - dashboard, immobiliser, airbag and others.:

http://www.cardiagtool.co.uk/a6-cable-for-carprog-full-v5...

Les commentaires sont fermés.